SULZER LOOMS


1. ALL METAL REEDS



(Click On Image 
To 
Enlarge)
Synthetic Bond, Single/Double Binding

Reed height 90 to 125 mm
Baulks 10 x 8 and bottom- 18 x 8
Dent width 3mm or 4 mm
Dent material Mild Steel or Stainless Steel

2. Serrated bars for warp stop motion sets

Electrical contact bar (machine + 5” length)
Moving bar (inner)



(Click On Image 
To 
Enlarge)

3. Alluminium heald frames



(Click On Image 
To 
Enlarge)
Profile section a) 90 x 9 Top Alluminium section and 68 x 9 
    or 75 x 9 Bottom Mild Steel section.
b) 120 x 9 top and bottom aluminium
    section (for picanol looms).  
Length 85”, 130” and 153”
Plastic Separators 85”= 3 at top and 2 at bottom, 130”= 5 at top and 4 at bottom, 153” = 6 at top and 4 at bottom.
Centre supports 85” = 1pc, 130” = 2 pcs, 153” = 3 pcs
Heald bar 16 x 2 mm “J” type, 22 x 1.6 mm “C” type

4. Steel Heddles
Length (mm) Eyelet size (mm) Strip size (mm) End loop

280
331
382

 5.5 x 1.2
6.5 x 1.8
7.8 x 3.8
8.0 x 2.5

5.5 x 0.3(simplex)
5.5 x 0.4(simplex)
6.0 x 0.3(duplex)
7.2 x 0.3(duplex)

 “J” type



(Click On Image
To
Enlarge)